Plantronics Voyager Legend Bluetooth Headset Manual⁚ A Comprehensive Guide
This manual provides a complete guide to setting up, using, and troubleshooting your Plantronics Voyager Legend Bluetooth headset. Maximize its features and enjoy seamless communication.
The Plantronics Voyager Legend is a premium Bluetooth headset designed for professionals and anyone seeking exceptional call clarity and a comfortable listening experience. Its sleek design combines advanced technology with intuitive controls for effortless communication. This headset boasts a range of features designed to enhance your calls and overall user experience. Enjoy crystal-clear audio with advanced noise cancellation technology that minimizes background distractions, ensuring your conversations remain private and productive. The Voyager Legend’s intuitive controls allow you to manage calls, adjust volume, and activate voice commands with ease;
Its lightweight and ergonomic design ensures comfortable all-day wear, even during extended calls. The extended battery life provides hours of uninterrupted use, making it ideal for busy professionals. Smart sensors automatically answer calls when you put the headset on and end calls when you remove it. Multipoint pairing allows you to seamlessly connect to two Bluetooth devices simultaneously, switching between calls and audio effortlessly. Experience superior sound quality and effortless control with the Plantronics Voyager Legend – your ultimate communication companion.
Getting Started
Before using your Plantronics Voyager Legend headset, familiarize yourself with its components and ensure it’s fully charged. The initial setup involves a few simple steps to get you connected and ready for calls. Begin by carefully unpacking the headset from its box. Inside, you’ll find the headset itself, a charging case (if applicable), a USB charging cable, and any additional accessories such as ear tips or a carrying pouch. Inspect all components to ensure everything is present and in good condition. If any parts are missing or damaged, contact Plantronics customer support immediately. Next, locate the charging port on the headset and connect the provided USB cable to both the headset and a power source, such as a computer or wall adapter. The headset’s indicator light will illuminate, indicating that it is charging. Allow the headset to fully charge before proceeding with the pairing process. Refer to the battery level indicator on the headset to monitor charging progress.
Once fully charged, you’re ready to begin pairing your headset with your Bluetooth-enabled device. Follow the pairing instructions provided in the subsequent section to establish a connection and start using your new Plantronics Voyager Legend headset.
2.1 Unboxing and Package Contents
Carefully open the Plantronics Voyager Legend packaging. Inside, you’ll find the Voyager Legend Bluetooth headset itself, neatly nestled for protection. Also included is a crucial charging case, designed for convenient charging on the go and safe storage. This ensures your headset is always ready for use, minimizing downtime. A USB charging cable is provided, allowing you to connect your headset to a power source for charging via a computer or wall adapter. This cable is essential for powering your headset and maintaining its battery life. Depending on the specific model and region, you might also find extra ear tips in various sizes. These are designed to fit different ear shapes comfortably and securely, ensuring a snug and comfortable fit during extended use. Finally, a user manual, such as this one, is included to guide you through setup, usage, and troubleshooting. This manual provides detailed instructions and helpful tips to enhance your experience with the Plantronics Voyager Legend. Please retain the packaging in case of future returns or warranty claims. Carefully inspect all components to verify they are undamaged and in good condition. If anything is missing or damaged, contact Plantronics customer support immediately for assistance.
2.2 Charging the Headset
Before using your Plantronics Voyager Legend for the first time, it’s essential to fully charge the headset. Locate the micro-USB port on the headset. This port is usually concealed under a small protective cover. Connect the provided micro-USB cable to this port on the headset and the other end to a USB power source. This could be a computer’s USB port, a wall adapter (not included), or a power bank. The headset’s indicator light will illuminate, showing that charging has begun. The color of the light will indicate the charging status; consult the legend in this manual or on the Plantronics website for precise color interpretations. A fully charged headset will typically take several hours. Avoid using the headset during the initial charging cycle to ensure optimal battery performance and longevity. Once fully charged, the indicator light will change to a solid color, signifying readiness for use. Remember to disconnect the charging cable after the headset is fully charged. Leaving the cable connected for extended periods can potentially shorten the battery’s lifespan. Regularly charging your headset will maintain its optimal performance. Always use the provided cable or a compatible micro-USB cable to avoid damaging the headset’s charging port or battery.
Pairing and Connecting
Pairing your Plantronics Voyager Legend with your Bluetooth-enabled device is a straightforward process. Begin by ensuring your headset is powered on and in discoverable mode. This is usually indicated by a flashing light; consult your headset’s indicator light guide for specifics. On your smartphone, tablet, or computer, navigate to the Bluetooth settings menu. Activate the Bluetooth functionality and initiate a search for available devices. Your Plantronics Voyager Legend should appear in the list of detected devices. Select the Voyager Legend from the list. You might be prompted to enter a pairing code; if so, refer to your headset’s documentation or the quick-start guide for the correct code. It’s usually “0000” or a similar simple sequence. Once the pairing is successful, your device will confirm the connection. You should hear an audible confirmation tone from the headset. After successful pairing, your Voyager Legend will automatically connect to your device whenever it’s within range and powered on, making future connections seamless and effortless. If you experience any difficulties, ensure both your device and headset have sufficient battery power. Refer to the troubleshooting section of this manual for further assistance if needed. Remember that your headset can typically store multiple paired devices, simplifying switching between them.
3.1 Pairing with Your Device
To pair your Plantronics Voyager Legend with your smartphone, tablet, or computer, first ensure the headset is powered on and in pairing mode. This is usually achieved by holding down a specific button on the headset for a few seconds – check your quick start guide for the exact instructions. You’ll typically see a flashing light on the headset indicating pairing mode. Next, access the Bluetooth settings on your device. This is usually found in the settings menu of your device. Make sure Bluetooth is enabled. Your device will then scan for nearby Bluetooth devices. The Plantronics Voyager Legend should appear in the list of discovered devices; its name may be slightly abbreviated. Select the Voyager Legend from the list. You may be prompted to enter a passcode; if so, the default is usually “0000,” but check your headset’s documentation to be certain. Once the passcode is entered (if required) and accepted, the headset and device will pair. You should hear an audible confirmation tone from the headset, and your device will display a confirmation message. If pairing fails, ensure both your headset and device have sufficient battery power and are within a reasonable range of each other. Retry the pairing process, following the steps carefully. If problems persist, consult the troubleshooting section of this manual for further assistance.
3.2 Connecting Multiple Devices
The Plantronics Voyager Legend boasts multipoint technology, allowing you to connect to two Bluetooth devices simultaneously. This means you can seamlessly switch between calls from your smartphone and computer, for example, without having to manually disconnect and reconnect. To connect a second device, first ensure your Voyager Legend is already paired with your primary device. Then, put your second Bluetooth device into discovery mode, just as you did when pairing the first device. On your Voyager Legend, you might need to enter a specific mode to allow connection to a second device; consult the quick start guide for instructions. Once the second device discovers the Voyager Legend, select it from the list to initiate the pairing process. Follow the on-screen prompts on your second device. A successful connection will typically be indicated by an audible tone from the headset and a confirmation message on both devices. Once connected, you can switch between calls by simply ending a call on one device and answering a call on the other. The Voyager Legend will automatically prioritize incoming calls, seamlessly switching your audio to the device receiving the call. Remember to keep your devices within range for optimal connectivity and to avoid interference from other Bluetooth devices. Should you experience any connection issues with multiple devices, please refer to the troubleshooting section of this manual for assistance.
Using the Headset
The Plantronics Voyager Legend offers a user-friendly experience. Its intuitive design makes it easy to navigate its various features. The headset’s comfortable earpiece ensures extended wear without discomfort, ideal for long calls or extended listening sessions. The multi-function button allows for straightforward call management, enabling you to answer, end, and reject calls with a simple press or hold. The headset’s superior audio quality ensures clear and crisp conversations, minimizing background noise and optimizing voice clarity. This enhancement contributes to a more effective communication experience, whether you are in a quiet office or a bustling environment. The Voyager Legend incorporates advanced noise cancellation technology, effectively filtering out distracting ambient sounds, ensuring the focus remains on your conversation. This feature is particularly beneficial in noisy surroundings. Furthermore, the headset’s smart sensors automatically answer incoming calls when you put it on, providing a hands-free experience and enhancing convenience. The headset’s battery life is designed for extended use, minimizing the need for frequent recharging. This ensures you stay connected throughout the day. For detailed instructions on specific functionalities, refer to the subsequent sections on call management, volume adjustments, and voice command utilization.
4.1 Making and Answering Calls
Making and answering calls with your Plantronics Voyager Legend is incredibly straightforward. To initiate a call, simply dial the number using your paired device. The headset will automatically connect once the call is initiated. Answering an incoming call is equally simple. When a call comes in, you’ll hear a ring tone through the headset. To answer, press the multi-function button once. Alternatively, the headset’s smart sensors will automatically answer the call when you put it on your ear. To end a call, press the multi-function button once. If you need to reject a call, press and hold the multi-function button for approximately two seconds. This will send the caller to voicemail. For conference calls, consult your paired device’s instructions on initiating and managing conference calls. The headset seamlessly integrates with the call management features of most smartphones and other Bluetooth-enabled devices. Remember to ensure your headset is properly paired and connected to your device before attempting to make or answer calls. If you experience any connectivity issues, refer to the troubleshooting section of this manual. The clear audio and intuitive controls make managing calls a hassle-free experience.
4.2 Managing Volume and Calls
Adjusting the volume on your Plantronics Voyager Legend is effortless. To increase the volume, press the volume up button located on the headset. Conversely, to decrease the volume, press the volume down button. These buttons provide precise control, allowing you to find your optimal listening level. The headset will provide audio feedback to confirm volume changes. During a call, managing calls involves several key functions. You can easily mute the microphone by pressing and holding the multi-function button. This is particularly useful if you need to temporarily silence your end of the conversation. To unmute, simply press the multi-function button again. If you need to switch between calls, the Voyager Legend supports call switching. Consult your paired device’s instructions for specific call management functions. The headset’s intuitive design ensures seamless call management, enabling you to effortlessly adjust volume and handle multiple calls with ease. Remember to keep your headset within a reasonable distance from your paired device for optimal performance. Poor signal strength can affect both audio quality and call management functions.
4.3 Using Voice Commands
The Plantronics Voyager Legend offers convenient voice command functionality, enhancing hands-free operation. To activate voice commands, simply press and hold the multi-function button until you hear the audio prompt. This prompt signals that the headset is ready to receive your voice instructions. Once activated, you can issue various commands, including answering or rejecting incoming calls. To answer a call, say “Answer” clearly. To reject a call, say “Ignore” or a similar phrase. The headset’s voice recognition technology is designed for accurate interpretation, even in moderately noisy environments. However, ensure you speak clearly and directly into the microphone for optimal recognition. The voice command functionality also extends to redialing the last number called. Simply say “Redial” after activating the voice command mode. Additionally, you can use voice commands to check the battery status. Say “Battery Status” to hear a verbal report on the remaining power. Remember that the accuracy of voice commands can be affected by background noise. Experiment with different phrasing to determine which commands work best in your specific environment. Refer to the Plantronics website for a complete list of supported voice commands and troubleshooting tips.